Belt Sizing Guide

How to Pick Your Belt Size (Available: 24–48”)

Measure a belt you already wear.

1. Lay your belt flat.

2. Measure from the end of the buckle (where the leather folds over)

   to the hole you use most.

3. That number in inches is your belt size.

No Belt? Do This:

1. Put on the pants you’ll wear with the belt.

2. Run a soft measuring tape through the belt loops.

3. Pull it snug (not tight).

4. Round to the nearest inch.

That number is your belt size.

Simple Tips

• Don’t guess based on pant size.

• Your belt should fit in the middle hole.

• If you’re between sizes, go up 1 inch.